iowabassplayer
Member
- Joined
- Mar 5, 2011
- Messages
- 66
Thank you for the replies. Pretty much Webster County, City of Fort Dodge, and IHP are what I am primarily interested in listening to.
Last edited:
Webster County has started its switch over to ISICS
- Thread starter Hoss88
- Start date
- Status
iowabassplayer
Member
- Joined
- Mar 5, 2011
- Messages
- 66
TRX-1 arrived about an hour ago. EZ-Scan set up. Library updated from RR onto SD Card. Everything up and going! I'll attempt to add some of those other talkgroups that were posted later tonight. Thanks again for the advice and info from everyone.
Hoss88
Member
Does anyone know what TGID 61901 is, I just heard talk on it but could not identify an agency.
iowabassplayer
Member
- Joined
- Mar 5, 2011
- Messages
- 66
Just listened to FDPD responding to an accident in Fort Dodge. Those units on scene switched to "COMM 6" until everything was cleared out. Any idea what TG that would be?
Hoss88
Member
luckily I was listening too. It's TGID 61916
iowabassplayer
Member
- Joined
- Mar 5, 2011
- Messages
- 66
Thank you! Much obliged
Hoss88
Member
Does anyone else have volume problems with the Webster county P25 system, especially the Ft Dodge PD? The dispatchers volume is low and the units will respond and the volume is 3x louder. Maybe this is an sds200 problem. Maybe I need to change global filters. Does anyone else have this problem?
iowabassplayer
Member
- Joined
- Mar 5, 2011
- Messages
- 66
Been listening this morning on my TRX1 - not noticing it but will continue to listen for it
wn0r
Member
This has been going on back during the testing phase. The PD Units are continually asking the dispatchers to speak up.
Usually get an apology and then they speak louder or get closer to the mic...
Usually get an apology and then they speak louder or get closer to the mic...
They had that problem with the old radio system but not as bad now. Surrounding counties don't seem to have that problem. I would say the dispatchers are not speaking loud enough and not using head sets. Some of the PD officers seem to scream into the mics, it seems to be the same ones. The newer portables they have I believe have the better noise cancelling mics and they don't need to talk as loud into them. Again a learning curve for them also with the new radio system.
wn0r
Member
The Harcourt tower is up and running now
Site: 2.94 NAC=4C1 ; Harcourt - Webster County
Neighbor: BEE00.4C9-1.18 ; Carroll - Carroll County
Neighbor: BEE00.4C9-1.35 ; Fort Dodge - Webster County
Neighbor: BEE00.4C9-2.8 ; Boxholm - Boone County
Neighbor: BEE00.4C9-2.40 ; Webster City - Hamilton County
Channel 1-1270: 769.94375 CC SCC DATA
Channel 3-1270: 769.94375-1 VOICE
Channel 3-1271: 769.94375-2 VOICE
Channel 1-1310: 770.19375 CC SCC
Channel 1-1350: 770.44375 CC
Site: 2.94 NAC=4C1 ; Harcourt - Webster County
Neighbor: BEE00.4C9-1.18 ; Carroll - Carroll County
Neighbor: BEE00.4C9-1.35 ; Fort Dodge - Webster County
Neighbor: BEE00.4C9-2.8 ; Boxholm - Boone County
Neighbor: BEE00.4C9-2.40 ; Webster City - Hamilton County
Channel 1-1270: 769.94375 CC SCC DATA
Channel 3-1270: 769.94375-1 VOICE
Channel 3-1271: 769.94375-2 VOICE
Channel 1-1310: 770.19375 CC SCC
Channel 1-1350: 770.44375 CC
Hoss88
Member
I have no idea how to program tower data. I can do a lot but that is not one of them. Thanks for the info.
It's not a problem with your receiver. It is a training problem with users not using their equipment properly, and a levels adjustment issue with fixed console equipment.
The only 3 pieces of data you need from the "tower data" you quoted are the 3 control channels: 769.94375; 770.19375; and 770.44375. You can manually create the new Harcourt site in your Sentinel favorites list with those frequencies and import into your SDS200, or wait until the site data is posted to the RRDB and update your SDS200 accordingly.
- Status
Similar threads
