Whistler VHF low band above 54MHz?

RichRuiz

Member
Premium Subscriber
Joined
Mar 29, 2005
Messages
13
Location
Hollister, CA
Greetings ladies & gents!

Looking for answers, solutions, suggestions, etc on Whistler being able to scan VHF low band above 54MHz? I'm interested in scanning the CHP remote links in the 72-75MHz band. Was going to e-mail whistler and see if they could add that as a future update, wanted to check in here first. Link to the CHP page below. Thank you all for your time, and have a great day!

 

Ubbe

Member
Joined
Sep 8, 2006
Messages
9,033
Location
Stockholm, Sweden
TRX scanners have that band opened in the E firmware, that anyone can load and try out. But it is still the same hardware using the same bandfilters so the sensitivity are pretty bad. Just around that 75MHz point are the worst and it switches from using the 25MHz-54MHz to the 108MHz-198MHz band filter. With my roof antenna I manage to hear a snowplow at 75MHz on the freeway 800 meters from my house when it was its closest to me for 20-30 seconds.

/Ubbe
 
Top