Whistler WS-1098 and WS-1088 Recording Issues

[Radiorandy]

I have both of the above units. I recently had a use for the recording feature on both units.
I have set up conventional channels in the same scanlist. There are P25 and analog channels. I am finding on both radios that the scanner records the P25 channels but it does not record the analog channels.
Has anyone had this same issue with their scanners? Is there a solution to this problem?

Randy VE3OGB

 

[buddrousa]

You do not record by scanlist you have to mark every single channel you want to record.
This is the same for my PRO-18 PRO668 TRX1 TRX2.

 

[Radiorandy]

All the channels that are in the scan list are marked to record. The issue is that only the P25 channels are being recorded!

Randy

 

[tvengr]

Is everything conventional or do you have trunked systems? Under the Advanced Features tab of EZ Scan, you have a recording Global Enable setting.

 

[Radiorandy]

As I listed in my original post, all the channels are conventional. The Global setting is enabled!
I'm trying monitor and record activity on my repeaters that are capable of both P25 and analog use.

 

[buddrousa]

Each frequency has to be set to RECORD Global does not tell the scanner to record everything.