Not to change the subject but is there a software download for "LTR Analyzer"? Also Phil thanks for the tip on Radio's that auto sort.If someone was running LTR analyzer, we could figure out how many channels there are. From there, just figure out the rest of the freqs. Then just log the TG's.
I'm not getting much of anything down here today... the WX yesterday must have helped ;-)
Software download in located in this thread Chris.Not to change the subject but is there a software download for "LTR Analyzer"? Also Phil thanks for the tip on Radio's that auto sort.
Since LTR standard only uses up to LCN20 the old school method with Uniden scanners was to fill in the same freq from 1-20 in a bank and see what channel it stopped on when a transmission went live in talkgroup search and record that LCN for that freq and repeat with all the other freqs until all were identified. A little tougher for larger systems especially with some LCN's that only lit up when the system is fully loaded but effective in any case.Hey Chris, I know about the software, that's why mentioned if someone was using it, they could find out just how many channels we need to be looking for.
How about the "Shack's" Q.C. folks releasing the new 106/197 flash code before Christmas first?Dear Easter Bunny: Can you get GRE to include this option in the next firmware upgrade please!!!!
If this is the one I'm thinking, there is a transmitter for it around 152nd @ Holly that I caught off Close Call.161.950 has been on the air for several years now.
The 161.925 and 161.900 are part of an LTR System.
161.925 LCN 6
161.900 LCN 7
161.875 LCN 5
162.000 LCN 1
161.800 LCN 3 or 14 ?
This LTR is very strong up here in the Fort Collins area.