• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

will a PM-400 work with CPS v16 828?

Status
Not open for further replies.

JCunningham17

Member
Joined
Jan 13, 2020
Messages
41
the guy i bought it from said i will need R05.16 to program it. I have version 16 build 828. I just read a thread on here about a guy with a PM-400 that mentioned to program you needed a version that the radio was programmed with or newer. but that thread was from 2010 so my have changed. i assume if i buy R05.16 i will have to put it on a different computer then V16? My radio has a build date of 2/2010.
 

alcahuete

Member
Premium Subscriber
Joined
Jul 24, 2015
Messages
2,473
Location
Antelope Acres, California
No, CPS 16 is for Mototrbo radios. The PM-400 is not a Mototrbo. You should be able to put the software on the same computer, as they are two different pieces of software.
 
Status
Not open for further replies.
Top