Will DJ-X11T receive SSB/CW on frequencies >76 MHz

Status
Not open for further replies.

KR1ST

Member
Joined
Jun 24, 2020
Messages
5
Hi there,

I've been looking into handheld wideband receivers and was just looking at the specs for the DJ-X11T and noticed that there is no sensitivity specified for SSB/CW above 76MHz. Does this mean SSB/CW cannot be used above 76 MHz on this radio?

73,
--Alex
 

aprilexe

Member
Premium Subscriber
Joined
Sep 22, 2015
Messages
46
Just switched mine on and it selects all modes at 76MHz although I don’t have anything to tune to so I can’t say how sensitive it is. I’m

If you’re considering picking one up they’re great. Decent sensitivity overall and HF and MW are better than expected. No mil air in my area but gets the SATCOM pirates on 253.850 FM perfectly with just a 20 inch whip.

There is also a narrow AM modification possible
DJ-X11 narrow AM filter modification
 

KR1ST

Member
Joined
Jun 24, 2020
Messages
5
Just switched mine on and it selects all modes at 76MHz although I don’t have anything to tune to so I can’t say how sensitive it is. I’m

If you’re considering picking one up they’re great. Decent sensitivity overall and HF and MW are better than expected. No mil air in my area but gets the SATCOM pirates on 253.850 FM perfectly with just a 20 inch whip.

There is also a narrow AM modification possible
DJ-X11 narrow AM filter modification
Thanks for that information! I've been interested in something that I could use to quickly monitor SSB signals at 144MHz and above. Since the manual doesn't specify this capability I'm not sure if this radio is capable of doing so.
 
Status
Not open for further replies.
Top