• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Will XTS belt clip fit XPR radio?

Status
Not open for further replies.

KG4INW

Member
Premium Subscriber
Joined
Apr 9, 2009
Messages
1,551
Location
Midlothian, VA
The D-Clip connects to a holster not the radio itself.
Actually, that particular D-Clip does connect to the radio's battery in place of the belt clip.

As for the OP's question, I know the clips look different and am not sure whether or not that would work on an XPR but it might? I might be able to check at work but it depends on how busy I am. Hopefully someone else could confirm beforehand.
 

KyFireFreak

Member
Feed Provider
Joined
Oct 24, 2005
Messages
162
Location
Northern Kentucky
It will work.

I have a D Clip that I used on our old HT1000's, then we went to HT1250's, and now use it on our XPR7550's with no problem. It will fit tightly to get it to "lock" in but it will work.
 

FFPM571

Member
Premium Subscriber
Joined
Mar 11, 2003
Messages
1,706
Location
Nashvillle
HT1000 and XTS3000/5000 use a different size slot in the battery so it may not work
 
K

kk4mei

Guest
HT1000 and XTS3000/5000 use a different size slot in the battery so it may not work

I'm using a xpr 7550

Edit:
after a little research I found out that yes the HT1000 AND 1250 are a match for the 3500 and 7550... Thanks just what I needed to know..

"This Motorola Mounting Bracket is placed directly onto the back of Radios. Fits Motorola CT250/ CT450/ HT1000/ HT750/ HT1250/ HT1550xls/ MTS2000/ MT2000/ XPR3300/ XPR3500."
 
Last edited:
Status
Not open for further replies.
Top