Willco 1024 module

[Blackswan73]

Many years ago I purchased a non-volatile memory module from Willco Electronics. I put it away for future use in one of two possible radios I have. My problem is that this module was designed to work with several different Icom radios by simply moving a few jumpers. I have both a R-71a, and a IC-751a. The module will work with either radio by the way the jumpers are configured. But after several moves, and several decades I have lost the instructions for installing the module and configuring the jumpers. The module is an ICM-1024. The board is dated 9/93 V.1.2. If anyone has the instructions for this module and could make a copy I would sure appreciate it
TIA

B.S.

 

[RFI-EMI-GUY]

You might want to look through Bob Grove, Grove Enterprises Monitoring Times back issues for a product review.

 

[Willcoele]

Many years ago I purchased a non-volatile memory module from Willco Electronics. I put it away for future use in one of two possible radios I have. My problem is that this module was designed to work with several different Icom radios by simply moving a few jumpers. I have both a R-71a, and a IC-751a. The module will work with either radio by the way the jumpers are configured. But after several moves, and several decades I have lost the instructions for installing the module and configuring the jumpers. The module is an ICM-1024. The board is dated 9/93 V.1.2. If anyone has the instructions for this module and could make a copy I would sure appreciate it
TIA

B.S.

I hope this helps.

 

[Blackswan73]

Thank you very much. This is exactly what I needed. I really appreciate your help

B.S.