• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Wouxun Wouxun KG-UV9 Repeater Programming

Joined
May 20, 2020
Messages
4
Hey everyone, I just bought a Wouxun KG-Uv9 ham radio. Does anyone have experience with programming it? I watched a few videos but can't figure out how to program a repeater into it. I'm trying to program a repeater using Repeater Book. If anyone knows how, can you walk me through a step by step on how to do it? Much appreciated! Thanks!
 

chief21

Member
Premium Subscriber
Joined
Mar 2, 2004
Messages
1,366
Location
Summer - Western NC; Winter - Tampa Bay FL
Programming these radios by the keyboard can be difficult. It would be easier to program it by software. I think that the free CHIRP application supports Wouxun radios, but you'll need a programming cable.
 

737mech

Member
Premium Subscriber
Joined
Aug 14, 2006
Messages
1,962
Location
Clark County, NV.
What model KG UV-9 ? They sell D/P/K/ maybe others.
If it’s a 9D there is software available I found it at Powerwerx same place I bought the cable.
 
Joined
May 20, 2020
Messages
4
What model KG UV-9 ? They sell D/P/K/ maybe others.
If it’s a 9D there is software available I found it at Powerwerx same place I bought the cable.
Wouxun KG-UV9D Plus
 
Top