• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Wrong message label with C3 Maestro

Status
Not open for further replies.

zephyr974

Member
Joined
Apr 23, 2014
Messages
2
Hi everyones,

I'm working on a C3 Maestro Console wich is often sending message like:

?1467869 deleted by CIM. Not in list,
?1258248 already programmed, or
Program entity ?1258250 not found.

I bet this is just a configuration problem.
I tried to solve it looking in the configuration menu, in the manual or in the past topic in this forum but without sucess so far.
Is there someone who can tell me what's wrong and how to fix it?

Thanks a lot!
 

DisasterGuy

Member
Joined
Aug 24, 2013
Messages
1,201
Location
Maryland Shore
Is this on a P25 or EDACS EA system? This values are too high to be standard EDACS LIDs or TGIDs. Do they appear when modifying a specific module?


Sent from my iPhone using Tapatalk
 

zephyr974

Member
Joined
Apr 23, 2014
Messages
2
Hi,
Thanks a lot for your help DisasterGuy!

This is an EDACS EA System. And those label doesn't appear when modifying a specific module. They only appear on the message panel on the top of the screen...
 
Status
Not open for further replies.
Top