XG-100P talkgroup issue

[twl911]

My XG-100P has been working great on the P25T system it's programmed for with one TG issue.

I have all talkgroups of interest working (14 total) except one, the talkgroup ID shows up in RPM correctly. Once the mission plan is programmed and activated in the radio, bringing up the CH INFO screen on the questionable TG, the TG ID shows "0". All other groups show their appropriate ID numbers.

I have read the RPM help file regarding the "use group 0" feature and check box, this box is unchecked. I find no differences in any talkgroup except for name and ID number.

Any ideas on what I am missing? I'm probably going to add an additional TG with the ID in question and see what happens.

 

[Forts]

What firmware in the radio? What's the TGID in question?

 

[twl911]

Update:
I changed the talkgroup ID of the TG in question to a non-existent group number, and added an additional with the desired group number.

The new desired group works, the original,now bogus group ID, still exhibits group ID "0" once loaded into the radio. The only common denominator is the TG knob location. It seems whatever is programmed to knob location "1" drops the ID number.

I have not tried to assign the working talkgroup to knob position 1, yet, as RX only it's not that important. However for future programming and my own knowledge I would like to know what's going on.

 

[twl911]

What firmware in the radio? What's the TGID in question?

Forts, the TGID is 1037. The firmware is I believe, the latest for the Unity. If you still have the Mission plan you helped me with about a month ago, it is listed as "fire dispatch"