• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

XG-25M programming cable?

Status
Not open for further replies.

JRT0311

Newbie
Joined
Jun 20, 2017
Messages
1
Long time reader and just set up an account since there seems to be a lot of good info on here. Does anyone know if the XG-25M has a unique programming cable or needs to be put in programming mode? I've tried an M7300 cable but RPM2 doesn't see it. Not sure if the 25M needs a USB programming cable, The M7300 one i have is serial but i had no issues with RPM2 seeing a couple XG-25P's with the serial interface.

Thanks.
 

flux4201

Member
Premium Subscriber
Joined
Jan 12, 2010
Messages
89
The XG-25M does have a special cable, part number: DM-CL2Y . And is supported by RPM2 R3C or later
 

Attachments

  • rpm2-R3C.png
    rpm2-R3C.png
    15.6 KB · Views: 246
Status
Not open for further replies.
Top