To anyone looking to acquire commercial radio programming software:

Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

To obtain Motorola software see the Sticky in the Motorola forum.

The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Xpr 6550 roam/scan question

Thread starter Mogley
Start date Sep 2, 2018
Tags

roam scan

Status: Not open for further replies.

Mogley

Member

Premium Subscriber

Sep 2, 2018

So My local Access (senior) buses operate using mototrbo, They can transmit their conversations on one of 4 frequencies, at random
470.8625
471.0625
461.375
451.8375.

All tg100 and cc12.
They aren't trunked bc I can pick up the whole conversation on my tytmd380 on 471.0625 if I'm lucky to have them transmit on this frequency. My question is, is there a way to make one channel on my xpr and somehow input all 4 channels in channel pool, roam, etc so that it will "roam" all 4 frequencies and play the audio from the currently transmitting frequency instead of wasting 4 channels and making a "Scan" list of all 4.
Thanks,
Blake

P.S. I'm setting them as RX only since my xpr is for my school helping, and its just something else I want on it. Also its MY radio I bought off ebay.