• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

XPR 7550 Zone Programming

Status
Not open for further replies.

unity2016

Member
Joined
Apr 17, 2016
Messages
18
So I just started to program channels into my XPR, and found that even though I have zones set up in my CPS, when it writes to the radio it shows up as one zone, doesn't show any other zones. It shows all the channels, but in one zone. What am I doing wrong?
 

unity2016

Member
Joined
Apr 17, 2016
Messages
18
So I figured out that I messed up along the way. When customizing the codeplug, I checked off "Channel in All Zones" under the "Numeric Keypad" option under the "Buttons" tree. Apparently this makes you able to access all of the channels in the radio at any given time from one zone, but makes it so your zones aren't separate. I changed it to "Channel in Home Zone" and that fixed my problem.
 
Status
Not open for further replies.
Top