• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

xpr 7550e programming help!!!!

Status
Not open for further replies.

rcfd34

Member
Joined
Dec 1, 2011
Messages
52
Location
Dakota IL
ok this might be a stupid question but im completey new to the cps programming im use to old school kenwood programming and the ease of it. but my question is im looking at the papers my guy left me and there is a qt/dqt encode and decode but i have no idea where to find this on the programming software. can any one help me at all
thanks
 

n3obl

Ø
Database Admin
Joined
Dec 19, 2002
Messages
1,831
Location
PA
TPL is equivalent of QT DPL is equivalent of DQT
 

Tech21

Member
Joined
Oct 16, 2018
Messages
440
In zone and then channel, you have to ensure your PL codes are correct. Also ensure that you have the tx of your repeater as the RX on the Radio. The Tx of the radio is the rx on you repeater. The PL code has to match what is in the repeater or else it won't work.
 

rcfd34

Member
Joined
Dec 1, 2011
Messages
52
Location
Dakota IL
Ok i got this issue finally taken care of now when I'm doing a 2 tone call alert does it have to have its own separate channel with out the plus active i thought I had it programmed to do it right but last night during our tone test it never did anything
 
Status
Not open for further replies.
Top