• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

XPR5550 HHCH extension cable - HDMI?

Status
Not open for further replies.
M

Mikek

Member
Premium Subscriber
Joined
Jan 10, 2003
Messages
295
Hey All,

Installing an XPR5550 into my truck. I've got the handheld control head (PLMN7131A) and need to get about 3 feet more on the cable to mount the radio where I'd like.

The /\/\othership sells a 16 foot extension cable, which is going to be WAY too much cable (and money).

Looking at the connectors on the HHCH and TIB, I'd bet money on them being standard HDMI. Can anyone confirm?? I'm hoping I can grab a short extension cable online that will work instead of the 16ft mess.

Thanks in advance!
 
N2ICV

N2ICV

Member
Premium Subscriber
Joined
Dec 14, 2002
Messages
590
Location
Gloucester County FM29in
Mikek said:
Hey All,

Installing an XPR5550 into my truck. I've got the handheld control head (PLMN7131A) and need to get about 3 feet more on the cable to mount the radio where I'd like.

The /\/\othership sells a 16 foot extension cable, which is going to be WAY too much cable (and money).

Looking at the connectors on the HHCH and TIB, I'd bet money on them being standard HDMI. Can anyone confirm?? I'm hoping I can grab a short extension cable online that will work instead of the 16ft mess.

Thanks in advance!
Click to expand...
So did you try it? I was thinking the same thing.
 
M

Mikek

Member
Premium Subscriber
Joined
Jan 10, 2003
Messages
295
Hi Mike,

A standard HDMI cable fits perfectly between the radio and the tail-end of the HHCH. I ended up not needing an extension, so I never tried powering up the radio with the cable attached.
 
Status
Not open for further replies.

Similar threads

K
XPR XPR5550 Digital Audio Dropping
Replies
3
Views
547
KD9RTX
K
Hooligan
  • Locked
A Long Time Ago in what seemed to be a Galaxy far, far away...
Replies
11
Views
3K
Hooligan
Hooligan
Top