• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

XPR7550E with an SMA?

Status
Not open for further replies.

APX6k

Member
Premium Subscriber
Joined
Oct 4, 2016
Messages
64
Good evening folks,

Did anyone happen to catch this unicorn on “the auction” site:


It looks like an OEM XPR7550E with a factory SMA antenna. The portion of the housing where the antenna mates is quite different too, no raised pedestal. The seller also claims the orange emergency button is larger, though it looks identical in size to my own 7550E. Anyone have any insight on this? Special production run?

Thank you!

-apx6k
 

Floridarailfanning

Member
Premium Subscriber
Joined
Sep 22, 2015
Messages
419
Location
East Tennessee
Did anyone happen to catch this unicorn on “the auction” site
Yep, I saw that one the other day. Personally I'd steer clear of a radio like that unless I could get the "Full Story." Knowing that ex /\/\ employees have stolen stuff for Hytera it could have easily disappeared out of the lab in Schaumburg or Fort Lauderdale.
 

alcahuete

Member
Premium Subscriber
Joined
Jul 24, 2015
Messages
2,474
Location
Antelope Acres, California
I saw that earlier in the week.

The Intrinsically Safe (IS) version has a normal SMA connector instead of the proprietary one usually found on the 7550s. My best guess would be that it's IS insides that have been re-cased.

Though that really wouldn't explain the larger orange button or the different mounting. [EDIT] Actually, all the buttons are larger on the IS version. But the larger buttons probably wouldn't fit in a normal case.

Hmmmmmmmm........
 
Last edited:

redbeard

OH, PA, WV Regional Admin
Database Admin
Joined
Feb 5, 2003
Messages
1,237
Location
BEE00.348-3.1
Apparently there is a special order "callbox version" that has the SMA. It's meant to be integrated inside an emergency callbox and probably is ordered sans accessories.
 

chrismol1

P25 TruCking!
Joined
Mar 15, 2008
Messages
1,149
The following kits include MOTOTRBO Next Generation XPR 7550e (VHF/UHF) and XPR 7580e (800/900) Enabled portables intended for Call Box, Remote Terminal Units (RTU), such as Motorola ACE 1000, and other Supervisory Control and Data Acquisition (SCADA) applications. The portables provide an SubMinature A (SMA) type antenna connector.

HK2079A CALL BOX RF KIT "FKP PORT E VERSION" 5W 136-174 MHz
HK2080A CALL BOX RF KIT "FKP PORT E VERSION" 4W 403-512 MHz
HK2081A CALL BOX RF KIT "FKP PORT E VERSION" 2.5W 800/900 MHz
 

Skypilot007

Member
Premium Subscriber
Joined
Dec 26, 2005
Messages
2,537
Location
Medford, NJ
They should have had an SMA connector on all the 7550 radios from the inception of the product. WTF were they thinking? Money grab to sell some proprietary antennae? I see it as bottom of the barrel engineering, seems Motorola can only get the C grade or lower interns for engineering anymore, and this is what you get.
 

PACNWDude

Member
Joined
Oct 15, 2012
Messages
1,336
Had to check some of my radios when I saw this. Have older XPR6550's with the SMA antenna, then newer XPR7550e with the proprietary version, not IS or like this SMA the OP showed. However, there have been several different antennas shipped with different batches, all UHF band. That and the third iteration of CPS2.0 is a little crazy. Newest batch of XPR7550e's meant I needed CPS 2.24.200.0, and they came with shorter UHF non-SMA connector antennas. I stay away from the odd items as well, buyer beware, and the Hytera lawsuit is still going on, and on, and on.
 

chrismol1

P25 TruCking!
Joined
Mar 15, 2008
Messages
1,149
They should have had an SMA connector on all the 7550 radios from the inception of the product. WTF were they thinking? Money grab to sell some proprietary antennae? I see it as bottom of the barrel engineering, seems Motorola can only get the C grade or lower interns for engineering anymore, and this is what you get.
it was probably $0.02 per unit cheaper to go with the stud
 

Floridarailfanning

Member
Premium Subscriber
Joined
Sep 22, 2015
Messages
419
Location
East Tennessee
They should have had an SMA connector on all the 7550 radios from the inception of the product. WTF were they thinking? Money grab to sell some proprietary antennae? I see it as bottom of the barrel engineering, seems Motorola can only get the C grade or lower interns for engineering anymore, and this is what you get.
Nope. The real reason was to force users to buy mobiles for their vehicles and base stations since that obscure version of SMA is almost impossible to adapt for connection to coax.
 

Floridarailfanning

Member
Premium Subscriber
Joined
Sep 22, 2015
Messages
419
Location
East Tennessee
It’s not a obscure SMA, it’s similar to the old MX connector
Well, still I don't think there are many options for adapting for use with external antennas. I find it interesting that they went back to that proprietary style connection from the CP series and older radios while the XPR6000 had regular SMA connections. And they removed the ability to use RSM's with antennas because the coaxial was removed from the accessory connector.
 

kayn1n32008

ØÆSØ
Joined
Sep 20, 2008
Messages
6,601
Location
Sector 001
Well, still I don't think there are many options for adapting for use with external antennas. I find it interesting that they went back to that proprietary style connection from the CP series and older radios while the XPR6000 had regular SMA connections. And they removed the ability to use RSM's with antennas because the coaxial was removed from the accessory connector.

They(MSI) Intentionally neutered the 7550. Because the cubic dollar APX is the ‘mission critical’ radio line. Can’t have a ‘mission critical’ PS speaker mic on the XPR series because then PS agencies would buy it and use it. No different than the NSPSAC being locked out of the XPR6850/7850. It’s to drive their APX sales.
 

Floridarailfanning

Member
Premium Subscriber
Joined
Sep 22, 2015
Messages
419
Location
East Tennessee
I'm really looking forward to seeing what the next generation of radios is going to offer. Hopefully, it won't be an enhanced 2.0, but a complete redesign. I'd be willing to bet a dual-band radio with 3.5Ghz CBRS is coming as it would satisfy the needs of customers who have been needing dual-band TRBO radios and would put more Nitro capable hardware in customers hands.
 

alcahuete

Member
Premium Subscriber
Joined
Jul 24, 2015
Messages
2,474
Location
Antelope Acres, California
I'm really looking forward to seeing what the next generation of radios is going to offer. Hopefully, it won't be an enhanced 2.0, but a complete redesign. I'd be willing to bet a dual-band radio with 3.5Ghz CBRS is coming as it would satisfy the needs of customers who have been needing dual-band TRBO radios and would put more Nitro capable hardware in customers hands.

Unfortunately, I don't think that need exists outside of amateur radio. I would do anything for a good dual band Mototrbo radio. Would make me a happy camper. :D
 

Floridarailfanning

Member
Premium Subscriber
Joined
Sep 22, 2015
Messages
419
Location
East Tennessee
Unfortunately, I don't think that need exists outside of amateur radio.
Sure it does. . . There are countless Rural Fire Departments and SAR operations which use analog and DMR and need interoperability across VHF and UHF. Most of these outfits simply can't afford P25 and would happily buy multi-band TRBO gear if they could get it. Of course, MSI would undoubtedly insist that "Mission Critical" equipment is a must for those users.
I would do anything for a good dual band Mototrbo radio. Would make me a happy camper. :D
I second that!
 
Status
Not open for further replies.
Top