A new project I am working is building a small P25 repeater out of 2 UHF XTL's; my goal is to have a low power, low duty cycle P25 machine built out of two XTL2500's. I've done my research and have not seen a lot of info regarding building something like this outside of using XTL's for DVRS'. I know there are a few limitations such as lack of passing on RIDs and duty cycle problems but this is experimental at this stage.
Does anybody have any experience building something like this and if so, what sort of pinouts would I need out of J2 ports in the back. I am looking to build a custom cable for this as well. Also what CPS settings would I be looking at for the Rx and Tx side of things.
Closest helpful info I could find was the PDF of the Astro Spectra Consolette manual appendix A on page 107
Moreover, does everyone think this project is feasible?
Does anybody have any experience building something like this and if so, what sort of pinouts would I need out of J2 ports in the back. I am looking to build a custom cable for this as well. Also what CPS settings would I be looking at for the Rx and Tx side of things.
Closest helpful info I could find was the PDF of the Astro Spectra Consolette manual appendix A on page 107
Moreover, does everyone think this project is feasible?