• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

XTS 5000

Status
Not open for further replies.

draftinjoe

Member
Joined
Oct 31, 2015
Messages
11
ok i am hitting a brick wall here. i have a xts 5000 800mhz i am trying to monitor with but it will do a smartzone 3600 BAUD system like a charm but will not do a phase 1 system. here is the features it has, what am i missing??? I had a xts2500 that had 3600/9600 baud and it worked flawlessly.
H38
Q806
Q173
Q361
H14
Q498
H46
H43
G996
G857
Q947
Q667
Q446
 

draftinjoe

Member
Joined
Oct 31, 2015
Messages
11
Its enabled for 9600 Q361. User error
User error?? i dragged and dropped from a working 2500 codeplug but before that i hand entered every bit of info like i have done numerous times. but it will not RX at all. the smartzone system side RX's perfect
 
Status
Not open for further replies.
Top