XTS1500 Invalid Field

[Flameout00]

I've been trying for about an hour to program one of my XTS1500 radios, to have the Three Position Concentric set to Zone Select, but keep getting a message that it's in invalid field. I just don't mess with this software enough to know what the heck I'm doing. Just enough to be dangerous. Right now, the Three Position Concentric, whether on A,B or C, shows the same channels. I did add a populated Zone Channel Assignment-2 under Zone Channel Assignment.
I've been trying to compare settings between the radios to see what is different, but so far I'm clueless

 

[ryolsen8]

You need to have all 3 set for Zone Select.

 

[a417]

Can't have unprogrammed in the last two.

 

[N4KVE]

Can't have unprogrammed in the last two.

No. All three must be zone select.

 

[Flameout00]

Holy crap, now I feel stupid. It is always something simple and I appreciate the quick replies. Not using this Astro 25 except once in a blue moon, it can be intimidating. I still don't know what half of the settings do

 

[a417]

No. All three must be zone select.

yes.

 

[Flameout00]

Ok, one other (probably dumb) question. If they all have the same System Package (Conventional), same model number, same FLASHcode and same Feature Set, can one just be cloned to the others? Using the Tools; cloning; Clone Radio; Program Radio settings?

 

[N4KVE]

Ok, one other (probably dumb) question. If they all have the same System Package (Conventional), same model number, same FLASHcode and same Feature Set, can one just be cloned to the others? Using the Tools; cloning; Clone Radio; Program Radio settings?

Yes.

 

[Outerdog]

Yes.

Did you watch your buddy do it?

 

[N4KVE]

Did you watch your buddy do it?

No, for regular programming/cloning, I can do that. I only see my buddy for “special stuff” that can’t be discussed here.

 

[a417]

No, for regular programming/cloning, I can do that. I only see my buddy for “special stuff” that can’t be discussed here.

Is this cowthief?

 

[N4KVE]

Is this cowthief?

No, a local guy.

 

[N4KVE]

Is this cowthief?

Dup.

 

[Flameout00]

OK, you guys lost me on the past few comments but the cloning worked perfectly. I could have saved a couple of hours of trial an error if I were a bit more tech savvy with this ASTRO 25 software. Now I know. Thanks for the help 👍

 

[bodnarp]

I have multiple zones and the top red button is not set up for emergency. I have my top red button set to zone up or you can set it to zone down so you can go through multiple zones