• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

XTS2500 700mHz Help

Status
Not open for further replies.

shelld

Member
Premium Subscriber
Joined
Jun 27, 2009
Messages
33
Location
Knoxville, TN
Hey guys, I'm having problems getting the 700mHz interop freqs programmed into my XTS2500. Whenever I put in a freq in the below 851mHz range, the field shows invalid (lined with red highlighting). Can anyone offer some opinions on this??
 
Last edited:

MTS2000des

5B2_BEE00 Czar
Joined
Jul 12, 2008
Messages
5,173
Location
Cobb County, GA Stadium Crime Zone
"TX Opt Transmit Dev" and "Tx Opt Transmit Dev T/A" are set to 2.5KHz for the 700 channels correct? if so, the red box should disappear.
700MHz requires narrowband deviation. if it's set to 5KHz or 4KHz, you'll get the invalid fields indicator.
 

mikewazowski

Forums Manager/Global DB Admin
Staff member
Forums Manager
Joined
Jun 26, 2001
Messages
13,457
Location
Oot and Aboot
Type those fields into the Help file. It will show exactly in the CPS where they're located.
 

mikewazowski

Forums Manager/Global DB Admin
Staff member
Forums Manager
Joined
Jun 26, 2001
Messages
13,457
Location
Oot and Aboot
Click on Help and then index.

Type TX OPT DEV into the search box and it's definition and location in the CPS will pop up.

The help files in Motorola CPS are actually very useful.
 
Status
Not open for further replies.
Top