• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

XTS2500 Scanlists

Status
Not open for further replies.
jfab

jfab

Member
Joined
Jun 10, 2006
Messages
1,462
Location
Broomfield/Aurora, CO
I have an xts2500 model III with FPP, however I can't figure out how to edit my scan lists, or turn scan on and off for that matter. I've scrolled with the 4 way button and tried many other things but can't figure it out.

any help appreciated!
 
K8TEK

K8TEK

Completely Banned for the Greater Good
Banned
Joined
Jul 13, 2004
Messages
681
Location
Ohio
jfab said:
I have an xts2500 model III with FPP, however I can't figure out how to edit my scan lists, or turn scan on and off for that matter. I've scrolled with the 4 way button and tried many other things but can't figure it out.

any help appreciated!
Click to expand...
The soft menu items need to be enabled in CPS.
 
DonnieDog

DonnieDog

Database Admin Deluxe
Database Admin
Joined
Oct 23, 2004
Messages
300
Location
Elizabethton, TN
Like K8TEK said, the person who does your programming needs to set the scan and the scan list edit from the CPS and assign it to an option button on the front/side or top switch. There are several different options for those buttons such as Clock, Battery Status, Inbox, High/Low Power, Talkaround etc.....
 
Status
Not open for further replies.

Similar threads

W
PR400 Programming newbie help
Replies
6
Views
600
Wireman121
W
Prospect62
M7300/XG-75M scan issue
Replies
4
Views
561
Prospect62
Prospect62
O
Sentinel Software issue with MARCS-IP and SDS100
Replies
3
Views
687
omega2266
O
H
F1721D Scanning Issue
Replies
4
Views
654
HVFD2012
H
A
BKR 9000 Thorough Review
2
Replies
26
Views
4K
gtaman
gtaman
Top