• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

XTS2500i fail

Status
Not open for further replies.

jryan3930

Member
Premium Subscriber
Joined
Dec 12, 2012
Messages
10
Location
Asbury Park, NJ
While programing a new (to me) xts2500i uhf my software "stopped responding" in the middle of writing the radio. The radio then read a fail 01/82. The radio cant be read anymore. What do I need to do to fix this issue.
351910b9887a555a23b4f63101e6151d.jpg
 

sfd119

Member
Joined
Jul 18, 2009
Messages
1,763
Try rewriting the radio with a codeplug again and again. It's worth a shot, otherwise it's off to the Depot.
 

SCPD

QRT
Joined
Feb 24, 2001
Messages
0
Location
Virginia
Re write with a original code plug when you first got it. If you don't have one pm me then we will email snd I'll help you with that.
 

SCPD

QRT
Joined
Feb 24, 2001
Messages
0
Location
Virginia
Like mentioned take a basic codeplug of it from when you first got it snd keep re writing snd trying to write to it. If all fails pm me.
 

VE3RADIO

Member
Joined
Jan 16, 2008
Messages
1,257
Location
Planet Earth
Just re-load the radio.. you dont need depot.. nothing to worry about, if you cant fix it sell it to me for cheap I would be happy to buy it :)
 

SCPD

QRT
Joined
Feb 24, 2001
Messages
0
Location
Virginia
It can be fixed. Don't sell it. Was going to pm you but you have that disabled. You can fix it yourself costs nothing.
 
Status
Not open for further replies.
Top