Will a programming cable that works with the XTS3000 also work with the XTS2500? They LOOK the same, but.....
Thanks.
Thanks.
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
XTS3000 programming cable
- Thread starter W4KRR
- Start date
- Status
MOTOROLANUT
Member
cable
XTS 3000 uses the cable + RIB to program. The XTS 5000/2500 series only uses a cable, Does you cable have a multi pin serial looking port or USB connection on the computer side?
XTS 3000 uses the cable + RIB to program. The XTS 5000/2500 series only uses a cable, Does you cable have a multi pin serial looking port or USB connection on the computer side?
Josh
Member
No, they are different.
XTS3000 requires a RIB
the XTS2500 does not and they are not compatible.
XTS3000 requires a RIB
the XTS2500 does not and they are not compatible.
My 3000 cable is a "ribless" aftermarket; it works just fine with my 3000. But I need to order a new one, as the small spring loaded clip broke off, and I was hoping I could get just one cable for my 3000 and for my future 2500. I guess I need two cables. Thanks for the replies guys.
Josh
Member
Yeah, but they are not OEM, and are more likely than not to brick a radio. To properly program the radio, you need the RIB and cable for XTS3000, otherwise you're taking a pretty big risk every time you hook your unit up.
- Status
