PhoenixxRising
Member
- Joined
- May 12, 2008
- Messages
- 9
Need some insight here. Have an XTS5000 M2 700/800. Bought used. Took to local dealer here to have programming done for our trunked system. Talked to him today, and he said he cant get it to work on the trunking. Tx/rx is fine in analog, but not on trunking. Here is what I was emailed.
We've finished the programming, however there
is a problem with the radio in the trunked mode.
It works fine on the RAMBIS system (conventional)
but won't affiliate with the trunked system.
The basic operation seems to be fine, TX/RX frequency, modulation
level etc, my guess is there is a problem with the trunked logic board.
I doubt it. The problem is that it tries to affiliate but can't. If you bang the PTT
enough times it do handshake one in a blue moon. But it never shows
it's actually "on" the system.
It's essentially the same information as all the other dept radios.
I deleted all the information in the codeplug before I started programming it.
IRC it was set to a Smartnet system not a P25.
Does this make sense to anyone? Seller is trying to say my guy doesnt know what he is talking about, and that he caused the problem, even though he is a very experienced dealer/service center. Also, the seller had it set it up for non-affiliated scan and non transmiting.
We've finished the programming, however there
is a problem with the radio in the trunked mode.
It works fine on the RAMBIS system (conventional)
but won't affiliate with the trunked system.
The basic operation seems to be fine, TX/RX frequency, modulation
level etc, my guess is there is a problem with the trunked logic board.
I doubt it. The problem is that it tries to affiliate but can't. If you bang the PTT
enough times it do handshake one in a blue moon. But it never shows
it's actually "on" the system.
It's essentially the same information as all the other dept radios.
I deleted all the information in the codeplug before I started programming it.
IRC it was set to a Smartnet system not a P25.
Does this make sense to anyone? Seller is trying to say my guy doesnt know what he is talking about, and that he caused the problem, even though he is a very experienced dealer/service center. Also, the seller had it set it up for non-affiliated scan and non transmiting.