Yaesu: Yaesu FT-897D

Status
Not open for further replies.

xflyerwdavis

Member
Joined
Jul 19, 2013
Messages
7
Reaction score
4
Location
Atlantic Beach
I have a Yaesu FT 897D that I just charged the batteries with the CD-24 Yaesu quick charger. The radio has not been used in a number of years. When connected to the power supply everyrhing works fine. When I tested operations on battery power the LCD goes dark after a few seconds. Can anyone tell me what the problem might be?
 

RichardKramer

Member
Premium Subscriber
Joined
Oct 13, 2006
Messages
1,954
Reaction score
4,243
Location
Reading, PA
I have that radio and the display will go dark to save battery life. If you move the tuning knob or press a function button, the display should briefly return if the batteries are good. If the display doesn't come back on after moving the dial; then the batteries are probably not holding a charge.
 

xflyerwdavis

Member
Joined
Jul 19, 2013
Messages
7
Reaction score
4
Location
Atlantic Beach
I have that radio and the display will go dark to save battery life. If you move the tuning knob or press a function button, the display should briefly return if the batteries are good. If the display doesn't come back on after moving the dial; then the batteries are probably not holding a charge.
Thank you for the response. The batteries are holding a 15v charge. Your response makes total sense and I believe that is whats happening. Thanks again. Walter
 
Status
Not open for further replies.
Top