Unication G1 pulsing audio scans

[mooseracing]

We're just starting to dip our toes in the Unications as we have alot of issues with Minitor V and VI's. We are using G1's and I am playing around with the programming to scan more so I don't have to carry my radio as much.

We are in the corner of a county so we try to monitor 2 other counties besides ours. I set up Priority scanning on the Unication and am scanning our County and the other two. The other two always pulse in and out during traffic. I've researched different things, is this normal or is there a way to solve that but still for the scanner to grab our tones when they come through?

Thanks

 

[KevinC]

I would imagine the "pulsing" is the radio checking the priority channel for traffic. It only has one receiver so for it to check the other channel it has to leave the current one, check it and come back.

The way to solve it is buy more G1's, don't use priority or get used to it.

And this is normal for priority scanning.

 

[Baker845]

The pager doesn't like flouresent lights, either. Haven't find setting to fix it.

 

[mooseracing]

And this is normal for priority scanning.

So would the Motorola radios - the XPR's specifically not have priority scanning? I know it scans 3 counties without that issue but I can not peak at that one's programming.

I notice a ton of electrical interference from printers, card machines, air conditioners, etc on one county that I do not have on the radio either.

The joy of new adventures.

 

[62Truck]

So would the Motorola radios - the XPR's specifically not have priority scanning? .

It depends on how its programmed.