• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

APX APX QCII issue - video

Status
Not open for further replies.

Asmitty0010

Member
Feed Provider
Joined
Feb 15, 2006
Messages
245
Location
New Hampshire
Can anybody explain this? I can't get this to auto reset the page alert - this happens whether I'm using Tone Signaling or just the traditional 2 beep alert. The only way this resets if I wait at least 3 mins or power cycle the radios. Running the latest firmware. Also happens on an apx8000 running R28. This is the first time I've seen the radio actually restart itself during a call alert page. Channel is an analog MDC channel with quikcall II alerting enabled. I don't have voice mute activated so the radio is already unmuted prior to the two tone page being sent. Any thoughts?

See video link.
APX7500 QCII page issue
 
Status
Not open for further replies.
Top