BCD325P2 DMR Tier 3 (T3 TIII) programming

[Napalm]

I've spent the last hour or so searching these forums.

I'm trying to get a T3 system programmed on my BCD325P2. I have the information I need:
NIPSCO Thayer Site ID: 21
935.2125 CC LCN 18
935.6625 TC LCN 54
936.0875 TC LCN 88
936.3125 TC LCN 106

(this information has been submitted to update the RR DB because it seems like I'm the only nerd who wants to monitor the electric company).

It tracks fine in SDRTrunk and my LCNs are correct.

In the 325P2 do I make a Trunked DMR system and add just the CC and the LCN to the site, or do I add all of the traffic channels and their LCNs too?

 

[RoninJoliet]

In the T3 systems I created I used ALL frequencies and they work great in my 325P2

 

[Whiskey3JMC]

For DMR TIII All confirmed active frequencies, their color code(s) & LCNs need to be entered to track the system properly. Unlike P25 where only the control channels are needed

 

[Napalm]

Thanks. I figured as much. I'll try it when I get home.

 

[Napalm]

Alright. I have the LCNs entered, the correct color codes and I have it set up as a TRBO Trunk system in the scanner. I added all the traffic channels to the same site as the CC. I get nothing but I can conventionally scan the channels and get voice out of it.

If I hold on the CC I get the Network and Site details.

Does the scanner need LSNs or LCNs? Its not a busy site so I won't lose sleep if I cant get it to track but at this point its the princple.

 

[cg]

Out of curiosity, do you have any idea of the brand of the system? Any chance it is Hytera? Only asking as there is a DMR type III system in southern New England that the Unidens do not care for and it is a Hytera.

 

[Napalm]

It's Moto. I *think* I have it working on the Uniden now, the traffic is so sporadic its hard to know for certain. But from the one voice call I did have come through, its tracking like it should and displaying TGIDs.