• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Connect Kenwood TKR D810 and KTI5

Status
Not open for further replies.
J

JLFH

Member
Joined
Sep 5, 2020
Messages
12
Location
PVR, MEX
forums.radioreference.com

Connect Kenwood TKR D810 and KTI5

Hi all, I have a problem for connection from TKR D810 to KTI5. I checked NSYNC cable, LAN cable, they are good. When use KPG 174D program repeater and KTI 5 then repeater appear fail message "E7". Pls help me for this problem. Thanks
forums.radioreference.com forums.radioreference.com

I have the same problem in the post quoted, which license do I need, I use K radios and repeaters
 
kd4efm

kd4efm

Member
Premium Subscriber
Joined
Jul 14, 2002
Messages
2,882
Location
EL98 Florida
Contact your local Mexico Kenwood Dealer to resolve.
If you have a moment, screenshot the repeater info and paste it here.
If the repeater is NON-US, then you will need to reachout to the dealer or Kenwood Intl.
to get the license file needed to have the software talk to the KTI-5
 
J

JLFH

Member
Joined
Sep 5, 2020
Messages
12
Location
PVR, MEX
kd4efm said:
Contact your local Mexico Kenwood Dealer to resolve.
If you have a moment, screenshot the repeater info and paste it here.
If the repeater is NON-US, then you will need to reachout to the dealer or Kenwood Intl.
to get the license file needed to have the software talk to the KTI-5
Click to expand...
Dealer send me another one that has the correct firmware, and its working now
 
Status
Not open for further replies.

Similar threads

Cowley639
Kenwood KPG-D3N Software question
Replies
5
Views
503
AM909
A
T
NXDN Question
Replies
10
Views
627
tlemke940
tlemke940
L
Kenwood Software Question: not a request for free software
Replies
3
Views
444
mmckenna
mmckenna
LynxVortex
Seeking Technical Information for Remote Control & Integration of Kenwood NX-820
Replies
11
Views
620
ramal121
ramal121
DODGEIT
Kenwood TK-7180 to Masters Communications RA-35
Replies
2
Views
294
DODGEIT
DODGEIT
Top