• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

Ctcss yes/no

Status
Not open for further replies.
Joined
Jul 5, 2011
Messages
32
Location
Medina OH
Say i want to program a radio to 460.55 and 141.3 CTCSS if i leave out the 141.3 when programing...will i still be able to hear that organization??? and other people

Thanks
 

OCO

Member
Premium Subscriber
Joined
Jul 17, 2011
Messages
923
Location
Central Michigan
Probably, if the scanner is set to ignore the tones...Pretty hard to tell when you don't give even the minimum info about the radio and the system you're programming for. We need Johnny Carson's "The Great Carnack" to answer......
 

CommJunkie

Member
Premium Subscriber
Joined
Feb 22, 2008
Messages
901
Location
FM19xr
Don't really need any information about the radio system. If you program 460.550 without the 141.3 PL, you will hear all traffic on 460.550, not just whoever uses the 141.3 PL.
 
Status
Not open for further replies.
Top