DSD+ V1.101pt Channel Activity Window Size

[hermite]

Hello,

I'm trying to resize the Channel Activity window. The only parameter that I found was for that window are the position and font:

-wcl<v>.<h> Channel window location [-wcl90.90]
-wch<num> Channel window font height [-wch15]

Problem is, without increasing the width, the TG and RADIO aliases that I populate flow over into the void.

Does anybody know how to resolve this?

Thank you.

 

[rkorchensky]

Hope this helps

Hope this helps. It may take some juggling but you will get it.

Just reread my submission. Perhaps I should add all you need is the info you already have.

The window will expand by itself if it is required to go wider or longer. Magic!


DSDPlus Rev 1.051

Usage:
DSDPlus [options] Decode from audio stream
DSDPlus [options] ? file Decode from .wav file
DSDPlus -h Show help

Options ( [...] = default value):

Display/Logging options:
-- Show command line options in window title
>file Create log file
>>file Append to log file
-t Time stamp log file entries
-T Time stamp log file entries and on screen data
-v<num> Frame information verbosity (0-4) [-v2]

-wsl<v>.<h> Source audio waveform window location [10.10]
-wss<h>.<w> Source audio waveform window size (min 50.200; 0 blocks) [200.300]
-wsp<num> Source audio waveform window update period (10-1000) [100]

-wel<v>.<h> Event log window location [50.50]
-wes<h>.<w> Event log window size (min ?) [400.500]
-weh<num> Event log window font height [15]

-wcl<v>.<h> Channel window location [90.90]
-wch<num> Channel window font height [15]

Input/Output options:
-i<spec> Input audio device (1-255) and channel (M/L/R) [-i1M]

-g<num> Output audio gain (0.001-999; 0=auto) [-g0]

-o<spec> Output audio device (1-255; 0=none) and channel (M/L/R) [-o1]
in/out channels are optional; default=in:mono, out:mode based

-Och <file> Output audio file channel count and name/type [-O DSDPlus.wav]
ch: M=mono,S=stereo,blank=auto; file: .wav or .mp3 (NUL=none)

-I<num> Create new .wav/.mp3 file every <num> minutes (1440=daily) [-I0]

-M<num> MP3 ABR kbps per channel (8-32) [-M15]

Decoder options:
-P Invert signal polarity (may be required for X2-TDMA and dPMR)
-mp optimize for PSK modulation (will not decode non-PSK)

-fa Auto-detect all protocols / frame types except dPMR [-fa]
-fd Decode D-STAR (no audio)
-fn Decode NXDN4800 (Kenwood NEXEDGE and Icom IDAS)
-fN Decode NXDN9600 (Kenwood NEXEDGE)
-fr Decode DMR/MotoTRBO (TDMA inputs + both output slots)
-f1 Decode P25 Phase 1
-fx Decode X2-TDMA
-fp Decode ProVoice
-fm Enable dPMR decoding (no audio)

-1 Synthesize audio for first DMR timeslot
-2 Synthesize audio for second DMR timeslot

-u<num> Unvoiced speech quality (1-64) [-u3]

Advanced decoder options:
-dr<num> Rolloff filter (1-11; 0=auto) [-dr0]
-dh<num> Hotspot size (1-8; 0=auto) [-dh0]
-ds<num> Scaling factor (50-80; not used with D-Star or ProVoice) [-ds64]
-dd<num> Damping level (1-100; not used with D-Star or ProVoice) [-dd10]
-dv<num> Viewport size (1-30; not used with D-Star or ProVoice) [-dv20]

Active keys:
? Display active keys list in event log window
1 Synthesize audio for first DMR timeslot
2 Synthesize audio for second DMR timeslot
3 Synthesize audio for both DMR timeslots
- Toggle command line options display
| Toggle symbol phase display
P Toggle signal polarity
R Start/stop recording of raw source audio to .wav file
F Backfill source audio display
S Close/reopen source audio waveform display
Spacebar Pause/unpause source audio waveform display
Esc Terminate decoding

 

[DSDPlus]

Problem is, without increasing the width, the TG and RADIO aliases that I populate flow over into the void.

Does anybody know how to resolve this?

The channel window should change its height and width automatically. If it does not, we would like to see a screen shot and the data that created it.

 

[hermite]

Thanks for the follow-up DSDPlus. I reinstalled the entire package and the window now auto-resizes accordingly. An invalid manual entry or file corruption must have occurred. No big deal for me at this stage as I am slowing learning the tools. Tks.

 

[rivardj]

Channel Activity Window Erratic Behavior

I am experiencing odd behavior with the latest DSD+ Fastlane version in regards to the Channel Activity window. The Channel Activity window responds as expected when using FMP to control my RTL-SDR dongles. However, when I use Unitrunker I only see the Pri , Target and Source columns getting populated most of the time. Occasionally all of the columns will be populated with the correct information from my DSDPlus.groups file along with the Ch and TX Freq columns. I run two instances of DSD+ with Unitrunker and three dongles. At times the Channel Activity window in one instance will fill all columns but not the other Channel Activity window in the other instance. Also, sometimes when all columns were at one time being populated something happens to cause the Channel Activity window to shrink back down and only the Pri , Target and Source columns get populated.

Other than the behavior described above, DSD+ Fastlane works great!

Anyone have any ideas as to what might be causing the erratic behavior?