• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

GP380 Program Question?

Status
Not open for further replies.
Steveradio

Steveradio

Member
Joined
May 31, 2005
Messages
954
Location
LehighValley/Poconos Pa
Im a Kenwood boy but my friend got a Motorola GP380 off ebay threw that China company and the program software and cables were included.
I was able to get the program to work but the only loop whole Im finding that the radio WILL not accept a set-up unlee the Transmit frequency is present which I do not like!!

For the transmit frequency put a generic 151.6250 and it works well but is there any way to by pass even being able to transmit on any frequency. He mostly usses it For towing service and those work fine but cant figure that part out.

Thanks again for your help
Steve
 
G

gary123

Member
Joined
Sep 11, 2002
Messages
2,499
with out seeing the CPS i can oly speculate based on the Gp339. in the radio personality page there should be a rx only check box.
 
Status
Not open for further replies.

Similar threads

C
Cross-Band Repeater Controller (NOT using VOX)
Replies
4
Views
559
MTS2000des
MTS2000des
N9JIG
Scanner Shack Tales: Desks and Cable Management
Replies
6
Views
1K
N9JIG
N9JIG
D
Use SDR as front end for DV-10?
Replies
1
Views
421
dsalomon
D
niceguy71
I finally did my Tram 3500 CB MAX range test
Replies
17
Views
1K
niceguy71
niceguy71
B
How do you program a G5 Unication Pager to work Fire Department? (South Carolina)
Replies
5
Views
1K
Echo4Thirty
E
Top