Help with Pocono Raceway

[trk699b]

Hello All,

I need help with some info. I do security at Pocono Raceeay during the races. I have a MT2000 UHF and want to put their freqs in my radio. I have their RX freqs and PL's but need the TX info, Can anyone help ?

RX
452.3250 025 DPL
464.4250 192.8 PL
463.900 754 DPL

 

[DELCOLHFC]

Good morning A.J.

A.J. I didn't think you got up this early, or are you still up from last night?

I'm no expert but from most everything I've seen the TX in that band are usually 5MHz higher than the RX. As an example, Lima's "400" has a TX of 465.5750 and a RX of 460.5750. In the higher UHF range that Delco Fire uses the step is 3MHZ.
Again thats just what I have noticed, if I'm wrong I'm sure someone here will correct me or my math. Hope this helps some.

Take care and stay safe,
Tom Z

 

[brey1234]

The info u seek for the repeater outs can be found under Pocono Raceway here:

http://www.radioreference.com/modules.php?name=RR&ctid=2285

They have been confirmed by me

 

[Joseph11]

He's looking for the repeater inputs.

For 450-470 MHz, repeater inputs are 5 MHz up.

 

[brey1234]

----I have their RX freqs and PL's but need the TX info, Can anyone help ?

RX
452.3250 025 DPL
464.4250 192.8 PL
463.900 754 DPL


All he has to do is add 5 Mhz to this list--that will give u the tx freqs.

 

[Steveradio]

457.3250 TX
452.3250 RX

469.4250 TX
464.4250 RX

468.9000 TX
463.9000 RX


Of Course you need to add the PL/DPL listed also DPL/PL are normally same for both TX and RX pairs.

Steve