Hill County SO-1 NAC?

Status
Not open for further replies.

texaskeystone

Member
Premium Subscriber
Joined
Jul 27, 2003
Messages
21
000 on site 1, 008 on site 3 (there is no site 2 yet). Their whole system is still in early testing so there are only occasional patches from VHF on temporary talk groups.
 

rattlerbb01

TX/LA Database Admin
Database Admin
Joined
Dec 22, 2004
Messages
2,320
Location
Boerne, Texas
000 on site 1, 008 on site 3 (there is no site 2 yet). Their whole system is still in early testing so there are only occasional patches from VHF on temporary talk groups.
I think he's asking about the conventional VHF NAC for SO-1. 155.5500 MHz.
 

texaskeystone

Member
Premium Subscriber
Joined
Jul 27, 2003
Messages
21
Put the two sites in a new P25 system, and use ID Search instead of ID Scan.

I did see the comments (on Bosque's site) about upgrading their current radio system. The fill in site is what I guessed it would be used for, since why would Bosque spend money on upgrading the current system if they were planning to switch.

I also agree that perhaps they should have joined either HOTRRS or NTIRN. The SW Johnson County site on NTIRN is near the county line between Hill & Johnson counties.
I think he's asking about the conventional VHF NAC for SO-1. 155.5500 MHz.

That would be 064.
 

texaskeystone

Member
Premium Subscriber
Joined
Jul 27, 2003
Messages
21
Actually, I should correct something here (and I should never reply again while I’m mobile). HCSO uses the P25 156.0 frequency currently marked on RR as Ch2 car to car as their primary dispatch (not car to car). This has been in place for about 2 years when they went P25. The legacy ch 1 155.550 isn’t used - at least I have not heard analog or P25 on it in about 2 years.

156.0 is also currently patched as TG 1 on the new digital system. This is a testing action and they take it down here and there. They also currently have Hill County Fire Dispatch 154.0475 patched to the digital system Tg 41200. They do seem to pull it down quite a bit as well while they are working on set up if the new system.

Apologies for the confusion.
 
Status
Not open for further replies.
Top