• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Hiring a MOTOTRBO/Avtec Expert in Phoenix, AZ

T

TampaTyron

Beep Boop, Beep Boop
Premium Subscriber
Joined
Feb 1, 2010
Messages
1,095
Location
Phoenix, AZ
Hiring an experienced MOTOTBO/Avtec expert.

Pays 90-125k depending on experience. Must be great at MOTOTRBO and very good at Avtec, also looking for as many of the following as possible: advanced electronics/console/P25/simulcast/SIP/Vesta/Avtec/BDA-DAS/IP networking/cable sweeping/site optimization/etc.

I really need folks who can go in front of customers without me or a salesperson standing over them in case the tech goes off the rails. The experienced guys know what I am talking about. I need folks who can train other techs, work with problem customers, guide the process.

Phoenix shop is in Tempe, AZ

Thank you, Ty Calta (TampaTyron).
 
You must log in or register to reply here.

Similar threads

T
Hiring a MOTOTRBO/Avtec Expert in Phoenix, AZ
Replies
0
Views
477
TampaTyron
T
T
Hiring Experienced LMR Techs in Houston and Phoenix- Air Comm
Replies
4
Views
838
TampaTyron
T
Top