Homewood PubSaf LTR Help

[dgoodson]

I have programmed the Homewood Public Safety LTR system in my 396T according to the RR database, and no luck. Suggestions appreciated

 

[geoff5093]

No luck meaning what? Can you not hear it? Can you not program it? Are you getting scanning errors?

 

[puzzleriddle]

try this.


01 460.362500
02 453.737500
03 460.062500
04 460.312500
05 460.125000
06 460.112500
07 460.625000
08 453.425000

 

[dgoodson]

Sorry Geof... I hate posts like mine No luck as in don't hear a thing,

I am trying Puzzles's set up now

 

[medic9351301]

homewood

i dont know what to tell you i just use the following freqs and i hear what i want to hear

460.125 pd

460.625 fd

 

[puzzleriddle]

01 453.487500
02 453.737500
03 460.062500
04 460.312500
05 453.425000
06 460.112500
07 460.125000
08 460.625000
09 460.362500
0262 0-02-002 Grp HOMEWOOD PD
0263 0-03-001 Grp HOMEWOOD PD
0264 WILDCARD! Grp NEW TALKGROUP
0265 WILDCARD! Grp PRIVATE CALL

or perhaps thes Homewood temp
01 460.362500
02 453.737500
03 460.062500
04 460.312500
05 460.125000
06 460.112500
07 460.625000
08 453.4250000
266 0-02-001 Grp HOMEWOOD FD
0267 0-02-002 Grp HOMEWOOD PD 1.0
0268 0-03-001 Grp HOMEWOOD PD 1.0
0269 WILDCARD! Grp NEW TALKGROUP 3.0
0270 WILDCARD! Grp PRIVATE CALL 3.0

 

[giessla]

I don't understand what you mean here - other than the frequencies. Do you mean temporary assignments, groups or what? Sorry to be ignorant but you are a bit cryptic to me - could you guide me along to understand what you mean?

Regards
Giessla

 

[puzzleriddle]

LTR systems must be IN correct (LCN) order & all freqs must be entered.

 

[dgoodson]

I loaded the eight frequencies in the third msg of this thread as an LTR system and haven't heard a peep. I have been at Brookwood hospital most of the week, so I am sure I am in range.

I honestly haven't tried the old simplex freqs, but I will. I am using a 396T has have monitored LTR systems without a problem in the past.

 

[puzzleriddle]

will be leaving town today email me at puzzle.riddle at yahoo.com the only thing I knopw tho is they need to be in LCN order.. I have heard a little traffic on em tho

 

[dgoodson]

I programmed all 12 frequencies (3 sites x 4 freq each) listed in the FCC data base for the "Y" systems in conventional mode, along with 460.125 and 460.65.

I hear PD just fine on 460.125 and FD just fine on 460.65 (plain old conventional mode)

Occassionaly, I would get a "hit", like someone momentarily keying a mic on one of the 12 trunked channels, never any audio, and never any "data" or "digital" noise.

When I would hear audio on the PD or FD channel, if I hit scan, I NEVER hear audio on one of the other 12 channels. My experience on LTR is that you should hear audio, though you might not "hop" to the proper channel, but this was in conentional mode and I heard nothing.

So I am done trying to figure out any sort of LTR set up! Just staying with the basic channels

 

[giessla]

dgoodson -- my experience is the same as yours. We must be missing something. It would be good if puzzelriddle could give us more of a tutorial and less of a riddle.

Regards
Giessla