• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

How to program a bct15x

Status
Not open for further replies.

ka3jjz

Wiki Admin Emeritus
Joined
Jul 22, 2002
Messages
21,730
Location
Bowie, Md.
#3
While that's fine if you do it manually (and have the patience of Job) most folks use software -- but I'm getting ahead of myself

This article from our wiki (links are always blue) has links to just about everything you need to know to get started - trunking concepts (always a sticking point for newcomers), USB cables, our DMA FAQ (which covers several topics the Easier to Read manuals don't) and more...

Program your DMA Scanner - The RadioReference Wiki

You might profit in going to the NY forum once you get the cable and software installed and ask for a file for your application (FreeScan is the way most folks start off). Be very specific about what you are trying to hear - keep in mind the 15X cannot decode anything that's digital in nature

HTH....Mike
 
Status
Not open for further replies.
Top