Ht1550 Quick call Help

[cole_gerhardt]

I have a Ht1550 and I am trying to get the quick call set up so the voice storage will work. I had a codeplug from a ht1250 that i copyed and it has 1 set of tones for fire calls on my fire channal I would like to set up the quick call on a second channal so I can record ems calls also. I have a codeplug from a minitor V stored voice that does what I want the radio to do is this possable, Im haveing trouble figering out this tone stuff.

 

[IAmSixNine]

Its been a while since i have done this but in the main tab of the CPS, theres an option to set the "Optoin Board" make sure thats set to voice storage.
From there you can set the amount of time for each recording. I think i had mine set to 45 seconds.
Also make sure you progam the voice record feature from the CPS menus section. Add that option for the conventional channel. After that program up the channel you want to record with the proper 2-tone sequential info, if thast what your going to use to break the squelch.
After that set the radio to that channel, scroll thru the menu to voice record, and select which option.

If these clear as mud instructions dont help or you get stuck, try to PM me or reply to the thread and i will get my 1550xls and actually check it out from there and not by memory.