• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Hytera MD656

Status
Not open for further replies.
J

jasej

Member
Joined
May 11, 2012
Messages
60
Location
Hidalgo Texas
Hello friends, good night!

I need to know how to put a Hytera MD656 device in Firmware mode, the model that comes with a remote microphone, !

hopefully someone can give me a guide on how to do it...

Thank you
 
S

speedway_navigator

Member
Joined
Apr 30, 2008
Messages
1,451
Location
Pittsboro IN
It depends on which cable you have.
PC47 has a switch in line, turn the radio off, put the switch in DL mode, then power the radio on.
Without the switch turn the radio off, put the mic on the hanger or short the hang up button to the metal plate on the back of the mic, push PTT and turn the radio on.
The LED flashes red to show it's in firmware mode.
 
Status
Not open for further replies.

Similar threads

R
Bought a bunch of Hytera PD502I and PD502.
Replies
2
Views
294
ladn
ladn
B
Help with programming Toronto EMS for a BCD 536HP
Replies
3
Views
538
gary123
G
S
HYTERA RPD90G
Replies
1
Views
519
sameehosen
S
ka8scp
Rpi 4 rtl-sdr setup for rtl_airband
Replies
4
Views
423
ka8scp
ka8scp
M
PC60 alternative solution
Replies
0
Views
141
Mamareza
M
Top