To anyone looking to acquire commercial radio programming software:

Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

To obtain Motorola software see the Sticky in the Motorola forum.

The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

IC-400PRO programming no answer from transceiver

Thread starter DavidEdwards
Start date Jan 9, 2024

DavidEdwards

Newbie

Jan 9, 2024

Here's an odd one.

I have two IC-400PROs. I can ID, read from and write to one of them using an aftermarket Prolific cable with no issues at all.

The other unit, I get the dreaded no answer from transceiver message. I've tried changing USB ports, COM ports, cables, baud rates, all to no avail. Device Manager (Win 10) says all ok, which suggests to me that the problem is at the radio end.

I've programmed hundreds of Icom mobiles and portables for volunteer groups and never encountered this before.

All suggestions very welcome.

You must log in or register to reply here.