To anyone looking to acquire commercial radio programming software:

Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

To obtain Motorola software see the Sticky in the Motorola forum.

The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

KCT-60 and KCT-18

Thread starter ve2mel
Start date Jan 26, 2020

Status: Not open for further replies.

ve2mel

Member

Jan 26, 2020

Good morning all,

I would like to share something with you. This weekend, I had to install an NX-3000 series radio. and I was sure the DC sense cable came with this radio. But I was very surprised to see that no ... So I looked at the pinout of the DB15 behind the radio and I had several VGA computer screen cables. I cut it in half and looked to see if the cable connected to pin 2 was of the correct size. Surprise the cable is green (for the green color of the screen) and of a good size. So I decided to make myself a KCT-60 and a KCT-18 with it, and it works very well. It is for this reason that I decided to share this experience with you.

Best 73's

Eric , VE2MEL