• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Kenwood Viking VP-6230

Status
Not open for further replies.
C

cduda603

Member
Joined
Dec 13, 2011
Messages
15
Location
New Castle, PA
Hello Group.

Trying to find some answers for a friend. A recent programming from the dealer missed a few items. Wanted to make sure 1) its possible and 2) proper labeling in the cps to reference.

1) PTT Sidetone for analog MDC1200 signalling...the radio is transmitting an MDC ID but no sidetone...
2) keylock shows enabled, but keys and switches are still enabled
3) backlight...is there a setting for when you change to channel or depress a button the backlight comes on
4) decode MDC ID....the radio is not displaying received MDC ID's

Thanks
 
Status
Not open for further replies.

Similar threads

K
  • Locked
EOT hum. Commercial repeater
Replies
10
Views
1K
Project25_MASTR
P
D
  • Locked
NEXEDGE information
Replies
10
Views
2K
mmckenna
mmckenna
webby52
  • Locked
Tait Programming Assistance
Replies
2
Views
3K
webby52
webby52
K
  • Locked
Signalling (MDC, QCII and DTMF)
Replies
2
Views
2K
Kermit_J_Frog
K
Top