MD-782G Version 4 software needed

[W4ADC]

Hello all. Have a high split 450-520 MD-782G. Trying to read the radio gives me a "input password" prompt immediately. We know what that means. The software and firmware version in the radio is F/W A4.05.16.003 DSP A4.05.16.002 CPS ver. V4.05.09.001. I read somewhere that I will need to find and load this older software to be able to turn off or disable the password function. Thusly matching the F/W and CPS so the radio will communicate with the PC in its current configuration. I am looking for advice and knowledge from experienced Hytera users and I will appreciate any help. BTW, the last programming or update on the radio was in 2013. This should make a great GMRS radio that I can pass along to someone.

Thanks guys, Tim W4ADC / WRKH438

 

[dano3131]

TRY https://radioquebec.net/forum/index.php
Current is 9.02

 

[0xFF1E071F]

Hello W4ADC;
If you have a password problem, i can fix that. I have already message you, you didn't reply me:

Hytera MD782 Password

Hello all. I acquired three (3) Hytera MD782 mobiles from an auction. Two of them programmed flawlessly as expected. Unfortunately one of them is "password" protected. Question??? Does anyone know how to bypass this or have a firmware reset procedure. Such a nice and useful radio to be rendered...

forums.radioreference.com

I did fix:

Hytera PD705lt read password in CPS

I have a PD705lt my son aquired from somewhere. Naturally we'd like to reprogram it. Trouble is, every CPS I have access to comes up with a requirement for a read password entry. We have no idea what the password might be, the 'default' password sometimes referred to, 88888888, doesn't work...

forums.radioreference.com

Please read the instructions, in the first link i gave.

 

[marcotor]

^^ Perhaps since it's been nearly 4 months since the OP asked their question, the issue was resolved?

 

[0xFF1E071F]

^^ Perhaps since it's been nearly 4 months since the OP asked their question, the issue was resolved?

Maybe,
I have replied this post because dano3131 had replied on this Wednesday. I though this was a new topic but it is not ¯\_(ツ)_/¯