• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

MOTOROLA HT1250 QUESTION

Status
Not open for further replies.
BITT211

BITT211

Member
Joined
Aug 23, 2010
Messages
224
Location
ELMA , N.Y
Got a couple of motorola HT1250''s uhf , and want to clean out all conventional personality channels in radio and start fresh programing the radio.
got motorola cps software pulled up , I did it once before and for got how to delete , can anyone give me step by step on how to delete , thanks !
 
BITT211

BITT211

Member
Joined
Aug 23, 2010
Messages
224
Location
ELMA , N.Y
ok thanks for quick reply , deleted >did that , now conventional personality list> empty , entire radio now unprogramed . ht1250 -
I have not programed in a while now , 71 yrs old , hate to ask anyone out there , can you give me a couple screen shots of step by step instructions on how to program only 6 freq's on zone 1 , with scan . software all readable / working , thanks for any help on this
 
A

a417

Active Member
Joined
Mar 14, 2004
Messages
4,669
create six conventional personalities, go to zone tab, and add six entries to zone one - then assign each personality to a slot in zone 1
 
BITT211

BITT211

Member
Joined
Aug 23, 2010
Messages
224
Location
ELMA , N.Y
thanks everyone for the help , 1 more question I promise , 1 more step needed help on >
I have 6 freq's on selector switch > #1 position scan > I want to now program each of the 6 freq's to selector switch position 1-6 > 1 freq. for each switch position so I can scan / monitor if needed. please update my mind again ! everyone did help alot already , thanks .
 
Status
Not open for further replies.

Similar threads

W
Trash-picked GM300 repeater setup
Replies
3
Views
436
petnrdx
petnrdx
Y
Motorola RDU4100 Channels Not Working
Replies
11
Views
513
ylink
Y
T
Complicated question about scanning between phase 1 and phase 2 systems
Replies
5
Views
822
OpSec
OpSec
bobruzzo
Help with DSD Plus install
Replies
5
Views
575
slicerwizard
S
B
HT1250 and Orange County Public Safety Radio System
Replies
19
Views
2K
bishead
B
Top