• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Motorola Minitor IV Issue

Status
Not open for further replies.
Lakes_Region_Comms

Lakes_Region_Comms

I’m only 14
Joined
Nov 4, 2021
Messages
72
Hey guys, I just got another Minitor IV, I put it on position C turn it on while holding the reset button, then press it a few more times to go to the "vibrate" test position, on my other IV's, it vibrates, on this one it does not. Any help would be greatly appreciated!
Model number: A03KUS7238AC
Band: 159-167 i believe
A: TONE CH 1 MONITOR
B: VIBRATE CH 1 SEL CALL
C: TONE CH 2 MONITOR
D: VIBRATE CH 2 SEL CALL
2 Channel Non SV
Edit: Does not vibrate at all on B or D
 
Status
Not open for further replies.

Similar threads

N9JIG
Scanner Tales: Obsolete Accessories
Replies
18
Views
2K
SABER3
SABER3
E
Motorola IV Calculation
Replies
8
Views
1K
ki4hyf
ki4hyf
R
QRP BS188 SDR HF Transceiver (RS918 clone) issue
Replies
1
Views
403
Robbie1984
R
T
Home Assistant Fire/EMS Tone Alert Automation
Replies
2
Views
995
DC31
D
S
Quick Call II Setup Issues - Motorola XTS2500
Replies
0
Views
435
Sokim24
S
Top