DSDPlus NXDN and DSD+

[ltginrage]

Good afternoon,
Ive been trying to listen to a local NXDN NEXEDGE 4800 System without luck. Im using 1 RTL-SDR and a mixture between my external antenna ant the dipole kit. My buddy says hes done it with one. I can reach sites 15 & 17 from my location but Ive been going with site 17 since I get a better signal from it. It tracks the CC perfectly but it dont chase the voice channels. I can monitor DMR, P25 with no problem but is there something Im missing thats making it not work?

If it helps this is what I have in my dsdplus.frequencies file:
NEXEDGE48, 14, 17, 0, 451.9750, 451.9750, 0
NEXEDGE48, 14, 17, 0, 462.0875, 462.0875, 0
NEXEDGE48, 14, 17, 0, 463.3875, 463.3875, 0
NEXEDGE48, 14, 17, 0, 463.8625, 463.8625, 0
NEXEDGE48, 14, 17, 0, 463.9500, 463.9500, 0

 

[ltginrage]

I posted it as I realized that I didn't have the Channel ID column filled out which was making it not receive voice channels

 

[RaleighGuy]

Good afternoon,
Ive been trying to listen to a local NXDN NEXEDGE 4800 System without luck. Im using 1 RTL-SDR and a mixture between my external antenna ant the dipole kit. My buddy says hes done it with one. I can reach sites 15 & 17 from my location but Ive been going with site 17 since I get a better signal from it. It tracks the CC perfectly but it dont chase the voice channels. I can monitor DMR, P25 with no problem but is there something Im missing thats making it not work?

If it helps this is what I have in my dsdplus.frequencies file:
NEXEDGE48, 14, 17, 0, 451.9750, 451.9750, 0
NEXEDGE48, 14, 17, 0, 462.0875, 462.0875, 0
NEXEDGE48, 14, 17, 0, 463.3875, 463.3875, 0
NEXEDGE48, 14, 17, 0, 463.8625, 463.8625, 0
NEXEDGE48, 14, 17, 0, 463.9500, 463.9500, 0

I'm assuming the system is 14 and the site is 17. Try this, it works for my local system:

NEXEDGE48, 14, 17, 451.9750, 451.9750, 0
NEXEDGE48, 14, 17, 462.0875, 462.0875, 0
NEXEDGE48, 14, 17, 463.3875, 463.3875, 0
NEXEDGE48, 14, 17, 463.8625, 463.8625, 0
NEXEDGE48, 14, 17, 463.9500, 463.9500, 0

 

[ltginrage]

I got it to work, I didnt have the channel IDs which is why it wasnt working

 

[slicerwizard]

I'm assuming the system is 14 and the site is 17. Try this, it works for my local system:

NEXEDGE48, 14, 17, 451.9750, 451.9750, 0
NEXEDGE48, 14, 17, 462.0875, 462.0875, 0
NEXEDGE48, 14, 17, 463.3875, 463.3875, 0
NEXEDGE48, 14, 17, 463.8625, 463.8625, 0
NEXEDGE48, 14, 17, 463.9500, 463.9500, 0

With missing channel/LSN fields? I doubt it.