• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Problems using CE27Win.exe -d on the VXR-7000

Status
Not open for further replies.
N

N3CMH

Newbie
Joined
Sep 20, 2017
Messages
3
Location
Milton, Florida
I have been using software version 1.08 and the GC-1050 cable from , "The Antenna Farm" and Windows 10 to program my unit. The software displays all of the units information and I can change frequencies and other information with no trouble, but it does not allow me (greyed out) to modify any of the data fields such as callsign, cwid, timing etc. I have tried to initiate the the "dealer mode" loading CE27Win.exe -d and the "manufacturer's mode" CE27Win.exe /m but both extensions is not recognized.
73, Wes
 
N

N3CMH

Newbie
Joined
Sep 20, 2017
Messages
3
Location
Milton, Florida
N3CMH said:
I have been using software version 1.08 and the GC-1050 cable from , "The Antenna Farm" and Windows 10 to program my unit. The software displays all of the units information and I can change frequencies and other information with no trouble, but it does not allow me (greyed out) to modify any of the data fields such as callsign, cwid, timing etc. I have tried to initiate the the "dealer mode" loading CE27Win.exe -d and the "manufacturer's mode" CE27Win.exe /m but both extensions is not recognized.
73, Wes
Click to expand...
NEVER MIND....I GOT IT. GOOD OLD COMMAND PROMPT DID THE TRICK!
 
Status
Not open for further replies.

Similar threads

P
  • Locked
VXR-7000 Programming issue and question
Replies
14
Views
5K
N0UUS
N
R
  • Locked
How to Program the Uniden SDS200 Scanner using Sentinal software
Replies
0
Views
8K
Roysch1
R
THE_FLATEARTH
  • Locked
Vxr-7000 out of band durability and HAM BAND ?'s
Replies
7
Views
6K
cmdrwill
cmdrwill
J
  • Locked
How to edit radio ID's using Excel for the BCDx36HP scanners
Replies
12
Views
6K
Muffin
Muffin
W
  • Locked
VXR-7000 Programming Dealer Mode? HELP!!!
Replies
0
Views
9K
WQOC472
W
Top