• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

ProGramer R17

Status
Not open for further replies.
DOH6713

DOH6713

Member
Joined
Dec 30, 2006
Messages
46
Location
TEXAS
I have the ProGramer Version R17. Im a virgin to it. What radios are availble to program with R17. I have an MRK, and LPE 200, 500m, Orion, and 7100p. Will the R17 program all these? also our agency is about to go ProVoice. Does the R17 support it? or will need to upgrade to the R20 with RPM? as it stands now, we do not use AEGIS or ESK's. Just EDACS 800mhz. Trunked. I see a long list of radios in my Radio Type drop down menu, everything from PCS to DPE's. But on my "About" read me on the help menu i see this:

MRK.dll, PCS.dll, MPA.dll are these all i can program?
 
ElroyJetson

ElroyJetson

Getting tired of all the stupidity.
Joined
Sep 8, 2002
Messages
3,921
Location
Somewhere between the Scylla and Charybdis
You're good. It'll do all you need it to. As for the radios it will program, just start by creating a new file and it'll allow you to select from among the available radio types. ALL of them that are supported. It's a pretty long list. Every radio you mentioned that you have is supported by R17.

The .dll files are files used by programmer to handle those radios. By no means does that mean that programmer is limited only to radios that have a .dll file named for them.


Elroy
 
rmiles

rmiles

Member
Premium Subscriber
Joined
Jul 12, 2003
Messages
248
From the ProGrammer readme.txt file found at C:\Program Files\MA-COM Software Tools\ProGrammer\readme.txt


4) Current Support:

4a) Radio support for ProGrammer.
DPE
EMM
EDACS 300P
EDACS 500M
EMP
FMD Trunked - Alphanumeric and Numeric Only
IPE
JAGUAR 725M
JAGUAR 700P
KMC
KPC
M7100
MDR/Allegra
MDX
MPA Trunked
MRK
Orion
P5100
P7100
PANTHER 300M
PANTHER 300P
PANTHER 500P
PCS Trunked
Prism HP/LPE
TNP MPA
XPE

Note: The LME was removed in Release 5.
 
T

TH23

Newbie
Joined
Dec 19, 2002
Messages
3
Rebanding Help please!

We just rebanded the 800 system here. I'm having problems programming a few radios. The system LCNs begin at 11 not 1. My question is how do I leave channels 1 thru 10 blank to begin at 11?
 
greenthumb

greenthumb

Colorado DB Administrator
Database Admin
Joined
Feb 29, 2004
Messages
1,942
If it's giving you an error because 1-10 are blank, just stick bogus frequencies in them. If the system isn't going to be assigning them, it won't matter.
 
T

TH23

Newbie
Joined
Dec 19, 2002
Messages
3
Rebanding Help please!

Worked like a charm. Thanks for the help. I've been away from EDACS for about 4 years now. I appreciate the help.
 
Status
Not open for further replies.

Similar threads

K
XG100P Custom Scan List
Replies
0
Views
240
kc9jmd
K
KE4OKD
XPR Motorola CDM1250 Repeater home build
Replies
15
Views
855
KE4OKD
KE4OKD
bobruzzo
A few "errors" on DSD Plus Fastlane startup
2
Replies
25
Views
864
DaveNF2G
DaveNF2G
E
SDS100/SDS200: SDS100 and 200 Programming problems
Replies
8
Views
1K
ka3jjz
K
N9JIG
N9JIG Addition by Contraction
2
Replies
21
Views
1K
JimD56
JimD56
Top