• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

R2500 software

Status
Not open for further replies.
Joined
Jan 16, 2007
Messages
6
#1
Hi , have got a R2500 with P25 module using Icom software is there any special settings required for trunking or P25 reception , am using Radio Reference frequencies for NSW Australia locations but not receiving anything... my Uniden 996T does ?
thanks
Roscoe
 
Joined
Nov 25, 2006
Messages
90
#2
The Icom R2500 Software will not trunk track. Also, the UT-122 will have some issues with Simulcast P25 on a Trunked environment.

With that said, you can download TrunkPCR which will allow you to trunk track, assuming the system is not a simulcast P25 system. With TrunkPCR, I can track 400, 500 and 800 Mhz trunked analog and P25 systems, but the P25 audio is simply junk on simulcast towers.
 
Status
Not open for further replies.
Top